The gluing machine of the 1000-type monochrome flexo 10m bellows customized by the customer in Angola has been installed and is ready to be tested.
The gluing machine of the 1000-type monochrome flexo 10m bellows customized by the customer in Angola has been installed and is ready to be tested.
Lao customer’s scheduled non-stop change roll arm swing edge closing and sound insulation cover tape slitting machine is loaded and shipped (with 12 semi-finished products and 1000 paper tubes).
Before use, the main parts of the automatic slitting machine should be inspected and filled with lubricating oil. When inspecting the disassembly and assembly automatic slitting machine, it is strictly forbidden to use unsuitable tools and unscient……
1. After the cutting is completed, the unloading is stopped; 2. Release the switch and lift the cutter unit. 3. Clean the crimping device and turn off the curling blower. 4. Turn off the photoelectric tracking system. 5. Turn off the power and air ……
1. The winding roller is pressed down, the counter is cleared, and the production is started; 2. During the operation process, check the winding status of each joint from time to time, and adjust the tension according to the tightness of the windin……
1. Put the cutter down, open the curling blower switch, set the winding tension, start the machine, run 2-3 meters, stop; 2. Measure the width of each joint to confirm whether the requirements are met. If there is any error, the ratio of the cutter……
1. Razor slitting 1.1. The razor slitting requires the film to travel in the correct direction to the winding section. 1.2. Adjust the photoelectric tracking to bring the film to the proper position. 1.3. Tension the film and attach the blade to th……
1. Confirm that the main power supply voltage is 380V. 2. Turn on each power switch and check if the electricity and gas supply are normal. 3. Before starting the machine, you must confirm that the surface of each guide roller is smooth and free of……
Introduction to slitting machine: Slitting machine is a kind of mechanical equipment for slitting wide sheets of paper or film into a plurality of narrow-width materials, which are commonly used in papermaking machinery and printing and packaging m……
The Guolian model slitter is suitable for narrow-width paper slitting. It has automatic meter counting, counting, set length, quantity automatic shutdown, unwinding by photoelectric automatic correction control and other functions. The whole machin……
First, the electrical parts should be cleaned and inspected regularly to remove hidden dangers in time. Second, the use of slitting machines is done by slitting machines and cross-cutting machines. Therefore, high-quality slitting cutters and cross……
1. Prepare before starting up 1) Check each electrical switch for any abnormalities such as falling off or damage. 2) Wear the traction belt at the normal temperature stop condition according to the requirements of the process piece. 3) Start the e……
