News

Home » News » What is the coating work of the coater manufacturer —

What is the coating work of the coater manufacturer —

Both ends of the structure of the coater manufacturer are mounted on the vertical support arm of the coater, and the coating mechanism is moved up and down by the belt, chain or cable transmission, and coated along the surface of the screen. The transmission is connected to a servo or variable frequency motor for smooth operation and precise control of the position of the coating mechanism.

Before coating, the clean, stretched screen is loaded from the front of the coater, and some models can also be loaded into the screen from the side. Among the models designed for large format frames, side loading is more common because the frame is large and bulky, and the side loading allows for a smaller amount of lift and movement. When the automatic screen coater is operated online with other automatic screen processing equipment (such as cleaning equipment, recycling equipment, drying equipment and developing machine), it is more convenient to mount from the side.

The coater manufacturer does not matter how the screen is installed. Once the screen is in the correct position, the pneumatic clamp or mechanical clamp is closed and the screen is locked. In order to make the operation more convenient, many models have pedals to control the folder movement, and the operator can free his hands to control the screen. After the screen is installed and the corresponding emulsion is poured into the automatic coater, the coating can be started.

A small coater is a machine that is a solid continuous film of one or more coatings applied to a substrate. The coater manufacturer tells us that usually the coating film of a small coater consists of multiple coats, depending on the requirements of the article to be coated. The numerical control panel is completely autonomously set. The three modes can be stored. The coating distance and coating speed can be adjusted arbitrarily in each mode. When different machines are operated at different times, all coating parameters are guaranteed to be highly consistent. The error is minimal. Imported steel rod drive, running more stable, longer service life and more accurate stroke control than traditional belt drive.

Digital display is fine, the maximum precision is 1UM, which subverts the traditional scale-adjusting micrometer, which is more accurate and more human. There are two units, MM and inch are suitable for different needs. The whole body is 304 stainless steel, anti-corrosion and anti-rust, firm and beautiful. One machine dual-purpose, wire rod mode (applicable to all imported domestic wire rods), scraper mode, effectively combines the advantages of the wire rod and the scraper, the customer is more optional, and the operating experience is superior. The coating machine manufacturer has a larger update, flexible upgrade function, drying, vacuum and optional addition according to demand, saving cost. The whole machine is guaranteed for two years, completely independent property rights, independent production, and more secure after sale. The vacuum system is completely built-in, more beautiful, compact and space-saving, not only convenient but also easy to use.

 

Coater link address: https://www.nwsstar.com/products/tape-coating-machine